Window maintenance Advice
When it comes to windows, most home owners don’t realize that they need to be cared for just like any other part of the home. By checking your windows regularly, you can prevent damage and deterioration of the sealants and finishes.
Regular checks of your windows will help keep surprise problems occurring and keep them operating smoothly. But always consider safety first, especially when checking windows that are not on the ground floor both interior and exterior. Use this check list as an annual reminder:
- Check the weatherstriping to be sure it is still working
- Examine the interior and exterior finish such as stain and paint
- Check all exterior caulking around the edges of the window frame.
- Check all hardware.
- Screw down any exposed nails, framing, screws, and other hardware.
- Check for any sand, dirt or dust from the window hinges, sills, and tracks.
Window Glass Maintenance & Care
While your window’s glass may seem durable, it can still become damanged with time, wear and tear as well as common cleaners. When it comes to chemical cleaners, we highly recommend using a mild soap along with water when washing your windows. By using mild soap you are helping to keep the coating on the window’s glass intact. If your window glass is not sufficiently getting cleaned with soap, try using mineral spirts or rubbing alcohol.
Don’ts of Cleaning
Window maintenance is one thing that tends to be under-appreciated. The slightest mistake can cost you a window and lots of money. Here are a few things to avoid:
- Allowing dirt to remain on the glass for an extended period inside and outside
- Cleaning tinted windows in direct sunlight
- Allowing splashed materials to dry onto the glass
Removing Labels or Stickers
When buying new windows, there tends to be a label that is put on the glass and is missed when taking it off or kids get carried away with putting stickers around the house and happen to put one on the window. They are best removed as soon as possible, but if a label or sticker is left on the glass simply use rubbing alcohol or nail polish remover to soak the sticker or label to get it to peel off.
Getting these chemicals on weatherstripping or finishings may result in damage
Caring for Hardware
Most windows come with brass hardware because of the attractiveness of the polished metal. To make this look last, quite a bit of maintenance. While most have protective coatings, small dark spots can start to form. This is the first indication of deterioration of the protective layer. This tarnish may come to a level that is undesirable level, they will need to be refinished. In order to refinish hardware, you need to do the following:
- Clean the hardware thoroughly, to remove all flakes from the existing coating by using ultra fine steel wool soaked in oil or soapy water.
- Once everything is clean and dry, you can apply a commercial polish found at hardware stores
- Then to keep it protected, apply several coats of automobile wax to create a barrier on top of the coating.
Having Problems with Condensation?
Now that it’s summer, there is vast temperature difference from the outside of the home the inside; this is when you notice condensation on the windows. They tend to have a lower surface temperature than any other surface in your home. This generally is a sign of high humidity in the home, though this is not a problem with your windows or doors, only if its a chronic problem. This could cause a multitude of problems including:
- wood rot/ warping
- no venting in the attic
- damp/wet insulation
- discolored/blistered/bubbling paint
- Moisture in the attic and walls
Generally, if this occurs with double-pane windows, the gas between the two panes that acts as insulation has escaped with a problem with the window itself. Thus, the best open would be to replace the window, repairing the problem and putting more gas into the window causes the window to lose its efficiency and will cause for more problems in the end.